craftathon
Sunday, June 26th, 2011We are moving again soon. And this weekend is the last weekend that I don’t have plans before the move, so I’m getting my last hurrah out of my system because all my crafty stuff has to go in storage as soon as possible.
I started going through my craft stuff and decided to finish off some UFOs this weekend.
I started with some bags …
(geometric little zippy pouch)
… and some more — 17 to be exact — quilted cards …
… but then I found a whole mess of white fabric, which I had no idea I had — my granny had left it in a bunch of unfinished projects she ultimately didn’t get to finish and her craft supplies were gifted to me. So, I decided it was time to finish my vintage scrap fabric (courtesy of Adria) strip quilt.
I’m still in progress today. I could have finished last night but I really don’t have room in our tiny apartment to lay out the quilt, and this is one that I have to lay out and think about. Here’s a photo of the progress. I’ll post a tutorial once it’s finished. It’s really quite easy, but takes a bit of thinking.
Here’s what I’ve done so far:
- Decided I wanted to do a strip quilt that kind of zig zagged with the scrap fabric Adria gave me — this, but without the border and with more variation in width and length of fabric.
- Cut all the fabric scraps to 2″, 1.5″ and 1″ wide pieces. One inch is probably too small, but to get the most out of this fabric, I had to go that small.
- Sewed all of the 2″ wide scraps together to make a really long strip, and did the same with the 1.5″ and 1″ scraps. Did this last year and pulled out the finished rolls of strips yesterday to start putting this together.
- Figured out that I wanted to make a 50″x50″ quilt. Originally I was going to go with twin size, but I realized I wasn’t going to have enough vintage fabric to do what I wanted to do.
- Cut 50″ wide strips from the long strip of each width I’d sewn together.
- Laid them on the floor to make 50″ wide — this required cutting the strips in halves and thirds. See above — the bottom piece is the full length that I want and is used for measuring.
- Cut 2″, 1.5″ and 1″ strips out of white fabric and added them to the ends of the vintage strips to make up the width difference so they measure 50″ again.
Here’s what I’m doing today:
- Deciding where I want the vintage strips to line up in the quilt, then cutting the end of the white off (where it goes past 50″) and adding it to the OTHER side of the strip (so there’s white on both sides).
- Trimming everything to 48″ or so wide since inevitably there will probably be a math error on my end.
- Pinning 3 strips at a time together and sewing them into a wider strip.
- Repeating until the quilt top has been finished.
And that’s my day today! Patchworking and probably running 6-8 miles. If I finish the quilt top in just a few hours (hoping so — I got where I currently am now with this quilt top in 3 hours yesterday), I’ll work on some more bags. I found the motherload of scraps I was saving of Wonderland …
… so I’ll probably be making some more zippy pouches out of that. I’m loving the zippy pouches. I need to make some more wallets, but I like to make the zippy pouches so much more. I figure I’m doing this for fun and not for money, so if this stuff sells, great, if not, I’ve got Christmas presents taken care of. Or maybe I can keep something for myself for once.
